E-8110T Instruction manual

1. How to open safe with digital safe lock

The factory default user code is 168 and master code is 888888

A. Touch the screen with your fingers and the button will be light on, the screen shows "------"

B. Input factory default user code 168 or master code 888888 and press "#" to confirm

C. Input correct codes the screen will show" OPEN" , if wrong codes the screen will show" ERROR"

D. Wrong codes input 3 times , the screen will show" HOLD"  , the keypad will be hold on 3 minutes

2. How to chang codes by reset button

  Change user code

A. When the safe is opened , press red button( side of keypad) and the keypad will be light on and beep

B. Input your new user code(1-8 digits). If your code is less than 6 digits , please press"#"

C.  After input new user code it will beep long and the screen will show" IN" , it means your user code is changed successfully

Change master code

A. When the safe is opened , touch screens with your fingers and input" 00", the screen will show"00"

B. Press the red button(side of keypad) and input your new master code(1-8 digits) , if your code is less than 8 digits press #

C. After new master codes input it will beep long and the screen will show" IN" , it means your master code is changed successfully

Remark: Before your close the safe , please repeat operate your new codes successfully and the code must be remembered

3. Low battery warning and auto-check

When the screen shows" LO-BAT" , it means the battery is lower , please replace it as soon as possible

4. How to Hidden codes

A. Touch the screen with your fingers and the keypad will be light on and screen shows "------", before input your codes please press"*" in advance , then the screen will show"0" when you input your codes

B. Before input your codes , press"*" again and it the code will not be hidden , the screen will show the code you input

5.  Alarm

Input correct master code the screen will show" OPEN", press"1" button within 5 seconds , the screen will show" BL-ON" it means the safe will be alarmed once it is shocked , input correct codes , the alarm will be stopped. Now press"2" button within 5 seconds , the screen will show" BL-OFF" , it means the alarm is canceled , when it is shocked the safe will not alarm any more

6. Override the safe with USB

When you lost all codes , the override USB will be connected at the bottom of keypad, then touch the screen with your fingers and the screen will show"-" and flash , then press"#" to confirm , then the safe will be opened

Remark: This USB is only override the safe and can't connect with computer or other digital equipments . Please DO NOT input override key or USB inside the safe , please put it in a safe place

New design touch screen safe lock for hidden safe Main feature:

Photo and pictures of electronic safe lock with touch screen

Motorized safe lock cylinder with digital system to close the safe automatically

Override safe with USB

Safe spare parts and accessories , including external battery box , alarm , USB and solenoid for option